DesiMetrics
Electricity hub

Jharkhand — 1 Unit Electricity Price

What one unit (kWh) of electricity costs under JBVNL's real, source-cited residential tariff.

Marginal unit price (top slab, incl. FCA & duty)

₹6.85 /unit

This is what your next unit costs once you're in the top slab — the realistic cost of running one more appliance.

Full slab-wise rates

SlabRate/unit
0–∞ units₹6.85
Billing cycle
monthly
Verified
29 August 2026

There are three different answers to "price of 1 unit"

All three are correct — they answer different questions. JBVNL bills on telescopic slabs, so a single figure does not exist.

  • The slab rate — ₹6.85 to ₹6.85/unit. This is what the tariff order publishes, and what you want when comparing one tariff order against another.
  • The effective average rate — your total bill ÷ your total units, fixed charges and duty included. This is the right figure for budgeting, and the table below shows it.
  • The marginal rate — ₹6.85/unit, shown at the top. This is what your next unit costs if you are already in the top slab — the number that should drive a decision about running one more appliance, like an AC or a geyser.

Takeaway: ask what you need the number for — budgeting, or the next appliance.

What a unit actually costs in Jharkhand, by consumption

Each row is a complete bill — energy charge, fixed charge, fuel cost adjustment and electricity duty — from the same tariff file our bill calculator uses.

ConsumptionTotal billActual ₹/unit
50 units₹543₹10.85
100 units₹885₹8.85
200 units₹1570₹7.85
300 units₹2255₹7.52
500 units₹3625₹7.25

Units are for one monthly billing period, assuming a 2 kW sanctioned load — most DISCOMs charge fixed charges per sanctioned kW, so a load has to be assumed. A different sanctioned load changes the fixed-charge component.

Notice this is not a straight line. On JBVNL the cheapest per-unit price lands around 500 units (₹7.25/unit) — below that, the ₹200 fixed charge is spread over fewer units so each one costs more, and above it the higher slabs push the rate back up.

The practical consequence: a very low-consumption household does not get the cheapest per-unit rate, because it is spreading the fixed charge over fewer units. And for a heavy-consumption household, each additional unit costs more than the average — so never budget an extra appliance at your average rate.

Takeaway: the per-unit price moves with consumption, so read the row closest to your own usage.

What gets added on top of the slab rate

The slab rate printed in the tariff order is not your whole bill. On JBVNL these sit on top of it:

  • Fixed charge — independent of consumption, usually based on sanctioned load. It applies even if you use zero units.
  • Meter rent and other line items — small amounts, but they also count toward your real per-unit cost.

This is why the marginal rate above is ₹6.85 while the top slab rate is ₹6.85 — the gap is FCA and duty.

Takeaway: budgeting at the slab rate will always understate the bill.

How to use this number

The most common and most expensive mistake is costing a new appliance at your average rate:

  • Adding an appliance — use the marginal rate of ₹6.85. An AC, geyser or pump stacks on top of your existing consumption, so it is billed at your highest slab.
  • Budgeting for the month — read the row nearest your consumption in the table above, since it includes the fixed charge.
  • Sizing solar or a saving — units you save come off the top slab first, so value the saving at the marginal rate, not the average.

Run this on your own consumption: JBVNL bill calculator, or compare across states on the unit-price directory.

Takeaway: average for budgeting, marginal for any new decision.

Where to find these numbers on your own bill

Better than any estimate is your own bill. Layouts differ by DISCOM, but these line items appear on almost all of them:

  • Units consumed — the difference between the current and previous meter readings. The telescopic slabs apply to this number.
  • Energy charge — the slab-wise computation, often broken into separate lines. Reconcile it against the slab table above.
  • Fixed or demand charge — tied to your sanctioned load. If it looks higher than expected, your sanctioned load may be recorded above what you actually need.
  • Derive your actual rate — total amount payable ÷ units consumed. It should land near your row in the table above; a large gap usually means arrears, an adjustment, or a revised FCA.

Takeaway: one division gives you your own true per-unit price.

Where these rates come from, and when they change

Every rate above comes from Jharkhand Bijli Vitran Nigam Ltd (JBVNL)'s published residential tariff, effective from 1 May 2025. We last verified it on 29 August 2026.

Residential tariffs in India are not set by the DISCOM alone — the state electricity regulatory commission approves them in a tariff order, and those orders are revised periodically. The fuel cost adjustment typically changes more often than the slab rates do. So check the primary source before any decision that depends on it:

The tariff source we used for JBVNL →

To be explicit: for this DISCOM our verification rests on a secondary source, not the DISCOM's or regulator's own published page. The rates are correct to the best of our knowledge, but confirm against the state electricity regulatory commission's tariff order before anything consequential.

Verification note: SOURCED (secondary) — Jharkhand domestic tariff from secondary references; pending primary SERC order cross-check.

How we source and verify these figures, and what we do when a category cannot be verified, is set out in our methodology.

Takeaway: this page is a dated snapshot, not a permanent rate — reconcile against the source for anything consequential.

Want your full bill, not just the unit price?

Open the full JBVNL bill calculator →

Frequently asked questions

What is the price of 1 unit of electricity in Jharkhand?

JBVNL's residential tariff starts at ₹6.85/unit for the first slab and rises to ₹6.85/unit at the top slab, before fuel cost adjustment and electricity duty. Your actual per-unit cost depends on your total consumption, since the tariff is telescopic.

Why isn't there one single "1 unit price"?

JBVNL bills residential consumers on a telescopic slab structure — each unit you consume is charged at the rate of the slab it falls into, not a single flat rate. So your 50th unit and your 400th unit are priced differently.

What does the marginal rate shown here mean?

₹6.85/unit is what your NEXT unit of consumption costs if you're already in the top slab — this includes the top slab rate, fuel cost adjustment and electricity duty. It's the realistic cost of running one more appliance, like an AC.