UPPCL Bill Calculator (Uttar Pradesh)

Have a fixed budget? Work backwards

Enter what you want to spend, and we'll tell you the maximum units that stays within it — the exact inverse of the calculator above.

How to use this calculator

1. 1Select your state — it's pre-selected for this page
2. 2Enter your sanctioned load in kW, shown on your bill or meter agreement
3. 3Enter the units consumed shown on your bill, or your meter readings
4. 4Choose your connection phase (single or three) if applicable
5. 5Review the itemised slab-by-slab result below the calculator

Your monthly billing cycle

UPPCL bills monthly.

What are slabs in electricity billing?

Most Indian DISCOMs bill domestic electricity using telescopic slabs — tiered per-unit rates that rise as your consumption increases.

• Each slab has its own rate — for example the first 100 units might be billed at one rate and the next 100 at a higher one.
• Slabs are telescopic, not retroactive — only the units that fall inside a higher slab are billed at that slab's rate, not your entire consumption.
• The slab count resets every billing cycle — monthly, bimonthly or quarterly, depending on your DISCOM.
• Some DISCOMs add a fuel cost adjustment or electricity duty on top of the slab rate — see the tariff table above for what applies here.

Read a full worked example of how telescopic slabs work →

Estimate not matching your real bill? See why fixed charges, FCA and duty sit on top of this estimate →

Uttar Pradesh residential tariff slabs

Effective from 1 April 2025 · Verified 29 August 2026 · source order

View Commercial, Industrial & Agriculture tariffs for Uttar Pradesh →

Two worked examples

Popular Uttar Pradesh Electricity Bill Calculations

Explore estimated electricity bills for commonly used consumption levels using UPPCL tariff slabs for Domestic connections in Uttar Pradesh.

Common UPPCL bill traps

How the UPPCL bill is calculated

Your bill, component by component

Based on the 250-unit example above. Expand each line for what it means and whether you can influence it.

What's included in your bill

How to read your meter

Digital meters show a running total in kWh ("units") on an LCD display — write down the number before the decimal point. To find your consumption for a billing period, subtract your previous reading from your current reading; that is exactly what the "Meter reading" mode in the calculator above does for you. Analog meters use a set of dial gauges read left to right — note the number the pointer has just passed on each dial.

How does UPPCL compare?

UPPCL's top domestic slab rate is ₹7.00/unit — cheaper than UHBVN (₹6.45/unit), — more expensive than MPCZ (₹7.25/unit), — more expensive than JVVNL (₹9.50/unit). Billing cycles also differ: UPPCL bills monthly, while UHBVN bills monthly, MPCZ bills monthly, JVVNL bills monthly.

Tips to reduce your UPPCL bill

• Where practical, keep usage below your next slab threshold — the marginal units above ₹7.00/unit cost the most.
• The ₹0.15/unit fuel cost adjustment applies to every unit you use, so reducing overall consumption reduces this line too — unlike the fixed charge.
• For high-usage households, rooftop solar can offset your most expensive top-slab units — see the solar section above.

Energy saving tips for Uttar Pradesh electricity bills

Net metering explained

Net metering lets a rooftop solar system export surplus power back to the grid through your existing meter, which runs in reverse. At billing time, your DISCOM credits the exported units against what you drew from the grid — you're billed only for the net difference. Combined with telescopic slabs, this typically offsets your most expensive units first.

About UPPCL

• 1999–2000 — Uttar Pradesh Power Corporation Ltd (UPPCL) incorporated 30 November 1999, began operating 15 January 2000, as the Uttar Pradesh State Electricity Board (UPSEB) was unbundled into separate transmission/distribution and generation entities.
• Subsidiaries — UPPCL bills consumers through five regional subsidiaries: Purvanchal Vidyut Vitran Nigam (PuVVNL), Madhyanchal Vidyut Vitran Nigam (MVVNL), Paschimanchal Vidyut Vitran Nigam (PVVNL), Dakshinanchal Vidyut Vitran Nigam (DVVNL), and Kanpur Electricity Supply Company (KESCO) for the Kanpur Municipal Corporation area — all on the same UPERC-approved tariff.

Does UPPCL supply Lucknow and Kanpur?

Both cities are covered, but by different UPPCL subsidiaries. Lucknow falls under Madhyanchal Vidyut Vitran Nigam (MVVNL), while Kanpur is served by its own dedicated subsidiary, the Kanpur Electricity Supply Company (KESCO) — both bill on the same UPERC tariff shown on this page.

How to check and pay your bill

1. 1Visit the UPPCL consumer portal (or your local subsidiary’s app, e.g. KESCO for Kanpur)
2. 2Enter your Account/Consumer ID to fetch your current bill
3. 3Verify the amount and pay via UPI, card or net banking
4. 4Save the payment receipt for your records

Why use this calculator?

• ✓Free and instant — get an estimate in seconds, no signup or login required.
• ✓Real DISCOM tariff data — uses each state board's own published slabs, fixed charges, duty and FCA, not an all-India average.
• ✓Full itemised breakdown — see exactly how the energy charge, fixed charge, duty and any subsidy add up to your total.
• ✓Works both ways — enter units to get your bill, or enter a budget to see how many units it buys.
• ✓Available in English and Hindi everywhere, plus the state's own language for major states.
• ✓Kept current — every tariff page shows its effective-from and last-verified date, sourced from the DISCOM's own tariff order.

Available in Multiple Languages

This calculator is available in English. Switch anytime using the language menu at the top of the page — no need to redo your inputs.

• ✓Same verified tariff data in every language — nothing is approximated in translation.
• ✓Switch languages anytime from the menu at the top of the page.
• ✓Available in English and Hindi on every state page, plus the local language for major states.

Frequently asked questions

Related calculators